684 reviews analysed
1. BAOSHISHAN Fume Extractor Solder Smoke Absorber Welding Fume Extractor Anti-static Lighting 30W with Adjustable Clamp for Electronics Crafts ESD Soldering Station Work (Fume Extractor)
- ⭕[PARAMETER]– Working Voltage:AC 100V-240V | Power: 30W | Length of Exhaust Tube：2m/6.5 feet/78 inches | Net Weight: 2kg | Package Dimensions：37*26*20 cm | ???? Please note that this smoker has no filtering function, but Cotton Filters (ASIN: B083NRDP45) can be purchased separately and installed in the smoke exhaust box.
- ⭕[LED LAMP]– The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
- ⭕[SUPPORT FIXTURE]– The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
- ⭕[ADJUSTABLE SUCTION]– The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
- ⭕[APPLICATION]– ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory， etc.
2. KOTTO Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction
- Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
- 24 inch flexible tube, Fume hood can adjust direction according to actual needs.
- Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
- Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
- US based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/, Assembly Instructions: https://www.youtube.com/watch?v=-EW8sMxegnw
3. KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station
- Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
- 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
- Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
- Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz).
- US based customer support, 30 days full satisfaction no question asked return period.
4. Valtcan Solder Smoke Absorber Fume Extractor Fan
- Remove Smoke, sodering fumes, flux smoke, odor from soldering stations, workstations, nails, paint etc quick,safe and efficiently
- 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.
- Adjustable tilt for more direct smoke absorption from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.
- Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations.
- On/off button located in back of smoke absorber fan. Plugs into AC socket for power.
5. iLiving – 24" Wall Mounted Exhaust Fan – Automatic Shutter – Variable Speed – Vent Fan For Home Attic, Shed, or Garage Ventilation, 4244 CFM, 6200 SQF Coverage Area
- CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our Wall Mounted automatic shutter vent fan is designed to help remove excess heat and moisture, prevent mold and allergens to keep your living space cooler and more comfortable year-round.
- MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home – including the attic, garage, shed, and more. Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
- VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVING ILG8SFSC speed controller (sold separately).
- WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heat longer than other competitors’ products adding to the fan’s longevity and preventing corrosive rust from forming.
- POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 24-inch runs on standard 120 volts at 1/4 HP, 2.65 amps with 1050 rotations per minute, cooling and ventilating an area of 4244 cubic feet per minute!
iLiving – Wall Mounted Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for! Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install. By removing excess heat and moisture our exhaust fan prevents mold and allergens to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills. • Heavy-Duty, Galvanized Steel Frame • Weather Resistant Aluminum Shutters and Blades • Motion-Balanced for Quiet Operation • Thermally Protected and Permanently Lubricated Motor • Automatic Shutters • For Home Cooling and Ventilation • Corrosion-Resistant Wire Guards • Variable Speed Setting Functionality On Select Sizes (controller sold separately) • UL Listed • Available in (8 or 9) Size Variations Perfect Cooling and Ventilation Solution For • Homes • Attics • Garages • Sheds • Removing Excess Heat and Moisture • Preventing Allergens and Mold • Reducing Cooling Costs • And More The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.
6. Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator Smoke Prevention Absorber DIY Working Fan
7. Weller WSA350 120v Bench Top Smoke Absorber
Weller transforms hand soldering The art of hand soldering has been around for a very, very long time, thousands of years in fact. But it was only until 1941 that a transformer based instant heating soldering method was developed by an impatient American radio repairman who was tired of sitting around waiting for his soldering gun to heat up. Carl E. Weller had to wait until after WWII ended in 1945 to get his Weller Manufacturing Company going. In 1960, the Weller Manufacturing Co. in the US patented the “Magnastat” soldering iron which used a magnetic component to regulate the temperature at the iron’s tip. In an expansion overseas beginning in 1959, the Weller GmbH plant in Besigheim, Germany, along with new plants in other countries, was organized to manufacture temperature controlled irons and soldering guns for primarily industrial markets throughout Europe and the Near East. Keeping pace with the increasing complexity of our customers’ needs, Weller Germany became the market leader for developing and manufacturing hand soldering products worldwide. Our products were proudly emblazoned with “Made in Germany”, signifying innovation and reliability.
From the Manufacturer
The Weller WSA350 is a bench top smoke absorber that removes flux fumes from a soldering workbench. Great for workspaces using more active fluxes used with lead-free solder. Fumes are absorbed by the replaceable carbon-activated filter – includes one replacement filter (WSA350F). Stand allows the smoke absorber to be adjusted to varying angles. Fan is quiet and will not add significant noise to the workspace. ESD safe.
8. Lincoln Electric EN 20 Extraction Nozzle | K2389-5
The EN 20 nozzle is lightweight and is designed for a wide array of welding applications. With its funnel extraction opening and magnetic mounting stand, it gives the welder a great amount of versatility and flexibility.
9. BAOSHISHAN Fume Extractor Solder Smoke Absorber Welding Fume Extractor 30W with 5 Pcs Activated Carbon Filters for Electronics Crafts ESD Soldering Station Work
- ????[PARAMETER]– Working Voltage:AC 100V-240V | Power: 30W | Length of Exhaust Tube：2m/6.5 feet/78 inches | Net Weight: 2kg | Package Dimensions：37*26*20 cm | Filter Size：130mm*130mm*10mm (5.1inch*5.1inch*0.4inch) . ???? Generally, the replacement cycle of activated carbon filter is 4-5 months.
- ????[LED LAMP]– The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
- ????[SUPPORT FIXTURE]– The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
- ????[ADJUSTABLE SUCTION]– The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
- ????[APPLICATION]– ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory， etc.
10. OrangeA Utility Blower Fan 8 inch Portable Ventilator High Velocity Utility Blower Mighty Mini Low Noise with 5M Duct Hose (8 inch Fan with 5M Hose)
- 【HIGH-VELOCITY FLOW】- The tremendous flow rate of 1500 m³/h is designed to quickly and efficiently ventilate or extract the maximum air. The motor speed can reach 2800 r/min, stable, and robust.
- 【SOLID CONSTRUCTION】- High-quality blades and steel housing construction for long-lasting performance, the aluminum-made motor casing is more durable yet more lightweight. 2 high-density protective covers to ensure the ventilation blower continuous working, low noise, less vibration.
- 【FLEXIBLE PVC DUCTING】- The ventilation hose is made of wear-resistant, soft vinyl weaved polyester fiber, with carbon wire spring and tape, and the inner wall is smooth. The design has super elasticity and flame resistance.
- 【COMPACT & PORTABLE】- The cylinder fan has a compact structure, easy to store, with handle, lightweight, easy to move and transport. 4 rubber feet ensure stable support on most surfaces.
- 【EXTENSIVE USE】- Our 8-inch cylinder blower fan together with this heavy-duty duct is designed for ventilation applications in factories, basements, farms, chemicals, tunnel, automobile manufacturing, etc.
8inch 200 mm Ventilation Fan with 5m PVC Ducting
The 8 inch cylinder blower can quickly and efficiently ventilate or draw the maximum air. The aluminum blade and steel shell structure are more durable. Ventilation blower can be used in factories, basements, farms, tunnels, automobile manufacturing plants, etc.
Utility Blower Specifications
Voltage: 110 V
Power: 230 W
Fan Diameter: 200 mm (8 inches)
Duct Diameter: 200 mm (8 inches)
Duct Expands Length: 5 m (16.41 ft)
Fan Speed (max): 2800 rpm
Air Delivery: 1500 m3/h
Static Pressure: 245 Pa
Noise: 61 dBA
Fan Size: 12.7 x 9.9”/32.3 x 25.1 cm
1 x 8inch Industrial Blower Fan
1 x 5m PVC Ducting
By our suggestions above, we hope that you can found Welding Fume Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!