The Best Water Cooling Pressure Release

Alphacool Eiszapfen pressure valve. A pressure valve for even more security in your system! In a normal system, a normal equalizing tank is usually enough to regulate rising pressure levels. Even the products built into a system are pressure-tested to at least 2 bar. But for users who really have a lot of components built into their loop, very high pressure levels can build up due to the extreme temperature difference between resting and operating. For some components, this makes it advisable to release the pressure with a pressure valve! This pressure valve can be easily screwed into a t-piece, for example, and can thereby be mounted at any part of a loop. Some equalizing tanks have several openings that are generally plugged with sealing caps, which can be used to mount a pressure valve. The G1/4” thread connection is also very short, only 4mm, and fits many other mounting spots in your water cooling system. The slight total height of the valve, only 16mm without screw thread, also gives you many installation options. The seal on its underside offers extra security in keeping your system leak-free. The valve can release excess pressure of 0.3-0.4kg/cm 2 or 4.3-5.7psi. Technical Details: Material: chrome nickel-plated brass Connection size: G1/4” Thread height: 4mm Height without thread: 16mm Outer diameter: 17mm Pressure released: 0.3-0.4kg/cm 2 or 4.3-5.7psi (0.3-0.4 bar) Scope of Delivery: 1x Alphacool Eiszapfen pressure valve G1/4 – chrome

Landgarden focus on the garden products developing and selling,providing
the new and qualified products.We are devoted to build a one-stop garden
accessories shop,thanks for reviewing our products.Pls e-mail us
if you have any question.
Advantage：
①Fine Brass misting nozzle
②Easy connect and Leak-proof T Joint
③Proper hardness misting line(ensure tight bond with T Joint)
④Special T Joint could be used to transform ordinary fan to misting fan
⑤All accessories include

Package included:
1x10M Misting line
1×3/4″ PVC faucet connector
1×1/2″ PVC socket
12xBrass mist nozzles(Including 1 spare nozzles)
11XEasy Connect Tee Joint
1XTee Joint for misting fan transform 1XEnd Cap
12XCable tie
12X”U” Clip
12XSpring Clip

Bitspower push-button air exhaust helps equalize air pressure in water-cooling systems. Model: BP-DWETAIR.

Hose barb fitting for 3/8in (10mm) ID tubing. G 1/4 BSPP (parallel) thread. Hose clamp included for 1/2in (13mm) OD tubing. Sold as a 4-pack.

Model: TR-NZL-V10B-BK-4P

G1/4 air exhaust fitting pressure relief exhaust valve is made of brass material, prevent rust and durable to use. The valves prefect for computer water cooling system, they will help to equalize air pressure in water cooling system. As the internal pressure discharge device of the water cooling system, be sure to install it at the water inlet position

Product Specification:
1.Material: Brass

2.Color: Golden tone.

3. Pressure Resistance : 0-1.6 Mpa

4.Operating temperature range : -5 to +80 degrees

5.Type : Straight G Thread Brass Fitting

5. Thread Length : 9mm

6.Total height: 15mm

7. Thread Size : 1/4 G Female Pipe

8.Color: Blue. 8.Weigh: 270g.

Operation:
For water discharge pressure, mostly closed operation state of operation of the water cooling system, with the cold fluid temperature rise, to generate internal pressure, internal pressure will increase the connection parts of the compressive strength endurance, and indirectly affect the service life of the system and the stability, through the release of internal pressure, to improve the operation stability of the water cooling system, obtain the optimum condition of the low voltage operation.

Press the positive button can play to the role of manual high flow exhaust, the system after running process is automatically through the built-in type hydrophobic too play a role in sustained release exhaust filter accessories, and resistance of water molecules through.

As the cooling system pressure discharge device, must be in the upper nozzle position installation, when to press the front button in a non sealed exhaust state, such as on a sewage outlet will lead to water overflow,it is recommended to installe in the upper part of the water tank.

Package including:  
2pcs G1/4″ Air Exhaust Fitting 

Pressure equalization membrane for top-side mounting in a reservoir. The membrane permits gas exchange between the cooling loop and the surrounding air, while preventing coolant from escaping. With this membrane, pressure changes caused by temperature variations can be equalized continuously. When installed, the membrane must always be positioned in the air bubble of the reservoir.

Model: 53138

EK-AF FillPort is a panel mounted adapter, primarily designed as an extension to reservoir to function as a service port. This adapter fitting allows easier topping-off and can alternatively also serve as a drain-port.

This adapter is equipped with one standard female G1/4″ port and is closed-off by enclosed G3/8″ Plug, required Allen Key is also enclosed.

Made from black coated CNC machined brass.

Technical data:
Threading: 1 x G1/4″
Plug: 1 x G3/8″
Thread length: 7.0mm
Diameter: 33.0mm
Height: 27.0mm

ROHS 2.0 compliant!

PLEASE NOTE:

This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109846933