Top 10 Vacuum Tool Kit 2 Inches

0
963 reviews analysed

1. CRAFTSMAN CMXZVBE38640 2-1/2 in. 4-Piece Wet/Dry Vacuum Gutter Cleaning Kit

CRAFTSMAN CMXZVBE38640 2-1/2 in. 4-Piece Wet/Dry Vacuum Gutter Cleaning Kit

Feature

Description

The CRAFTSMAN 4-Piece 2-1/2 in. Gutter Kit is great for tackling hard to reach gutters and other yard cleanup. The gutter nozzle is angled to fit into gutters to vacuum or blow out debris. The tapered blower nozzle makes blowing debris quick and easy and the wands extend the length of your reach. Attachment kit fits CRAFTSMAN and most other shop vacuums with a 2-1/2 in. diameter hose.

2. femor Brake Bleeder & Vacuum Pump Test Tuner Kit Tools with Case, 2 in 1 Automotive Tools with Adapters for Vehicle

femor Brake Bleeder & Vacuum Pump Test Tuner Kit Tools with Case, 2 in 1 Automotive Tools with Adapters for Vehicle

Feature

Description

Features: 2 in 1 brake bleeder kit

One of the easiest and cheapest ways to check an engine for serious issues is to do a vacuum test. A vacuum test can tell you a lot about an engine’s condition, even more than you think. 

Femor Vacuum tester can help you know if an engine is healthy or not in just 3-5 minutes and help you find the source of your engine mechanical problems. You will save yourself a ton of headaches on the road with this pratical and economical set. 

Now get yours for your beloved car! 

Note:

➤The basic ranges and procedures described here are pretty accurate for most situations, BUT every location is different due to altitude and other factors. If you’re at altitude, these readings may be lower (supposedly by 1 inch of mercury for each 1000ft above sea level, roughly). Thus, it’s good to use a vacuum gauge to ‘test’ a few known good engines in your area before testing a suspect engine.

➤This product cannot achieve a full vacuum of -30″Hg though the gauge does show to that level. Brake bleeding does not require that deep of a vacuum.

Tip: Periodically checking your engine vacuum will help you learn how your engine is doing and allow you to spot behavior out of the norm.

Specifications: 

☛Material: Brass & Plastic  

☛Pump Size: 9.1x 7.9x 1.2″(23x 20x 3cm)  

☛Measurement Range: -30-0 inches Hg, -760-0 mm Hg  

☛Weight: 2.3lbs  

Package Included: 

◆1 x Brake bleeder with vacuum gauge  

◆1 x Reservoir jar  

◆1 x “T” hose connector  

◆1 x Straight hose connector  

◆1 x Universal cup adapter  

◆2 x Lids  

◆2 x 24″ vacuum hoses  

◆2 x 3″ vacuum hoses  

◆2 x Tapered hose adapters  

◆3 x Brake bleeder valve adapters

3. CARSC Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters Case

CARSC Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters Case

Feature

Description

High Quality Car Auto Hand Held Vacuum Pistol Pump Brake Bleeder Adaptor Fluid Reservoir Tester Kit 2 in 1 Tool Kits

SPECIFICATIONS:
Condition: 100% brand new
Material: Alloy steel, plastics, rubber
Weight: 1.04kg
Dimension of case: 13.5*8.7*2 inch / 34.3*22*5 cm
Pressure range: 0-30inHg, 0-760mmHg

PACKAGE INCLUED:
_1 x vacuum pump/brake bleeder with vacuum gauge
_1 x reservoir jar & 2 x lids
_1 x “T” hose connector
_1 x straight hose connector
_1 x universal cup adapter
_1 x blow mold case
_1 x user manual
_2 x 24″ vacuum hoses
_2 x 3″ vacuum hoses
_2 x tapered hose adapters
_3 x brake bleeder valve adapters

NOTE:
Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals

4. WORKSHOP Wet Dry Vacuum Adapter WS25055A Wet Dry Shop Vacuum Adapter Combo Kit

WORKSHOP Wet Dry Vacuum Adapter WS25055A Wet Dry Shop Vacuum Adapter Combo Kit

Feature

Description

Product Description

A 3-piece wet dry vacuum adapter kit that includes a 2-1/-inch to 1-7/8-inch adapter, 1-7/8-inch to 1-1/4-inch adapter and 2-1/2-inch hose to hose connector. As a universal shop vacuum adapter it works with most wet dry vacuums including WORKSHOP Wet/Dry Vacs.

From the Manufacturer

Includes 2-1/2″ to 1-7/8″ Adapter, 1-7/8″ to 1-1/4″ Adapter and 2-1/2″ Hose to Hose Connector. This kit affords additional versatility to your vac.

5. POWERTEC 70130 Dust Collection Hose and Fittings | Premium 10ft Power Tool Dust Hose with Vacuum Attachments

POWERTEC 70130 Dust Collection Hose and Fittings | Premium 10ft Power Tool Dust Hose with Vacuum Attachments

Feature

Description

Style:10ft, 1 reducer

Introducing the Dust Collection Hose & Fittings Set by POWERTEC. This extra long hose, fittings and adapters combo was designed to provide you with a longer and more flexible reach for your dust collection needs. Whether you re using a workshop vacuum for clean up, or dependent on using one of your capable power tools keep your work area clean by simply attaching this super effective hose to the dust collection port and say goodbye to troublesome sawdust, dirt and debris. Compatible With Most Small Port Dust Collection Options Shop Vac Orbital Sander Table Saw Joiners Compact Router & more! Premium Quality Long and lightweight, this dust collection hose features a spiral corrugation which not only extends your actual vacuuming distance, but attributes to the decrease in noise compared to other hose types. It s unique design allows it to be quickly coiled up for easy storage. Each part is made out of premium plastic that features optimum durability for long term use and is highly flexible for free roaming, uninhibited dust collecting. Please note: *Although the hose can be used independently without the fittings, in order to attach the hose to the maximum sized vacuum port, the larger screw on fitting is needed. *The inner diameter and outer diameter on the plastic end fittings and hose are approximate sizes and results may vary slightly. . Please check your vacuum and power tools to make sure the hose and fittings fit properly (see size specifications below). Dust collector hose 1-3/16 O. D. Vacuum dust hose adapter 2-1/4″ taper up to 2-5/16″ O. D. Small plastic fitting 1″ I. D with a 1-3/16″ taper up to 1-1/4″ O. D Large plastic fitting 1-1/2″ I. D with a 1-25/32″ O. D.

6. Mr. Nozzle M-100-DB Wet/Dry Vac Tool Kit

Mr. Nozzle M-100-DB Wet/Dry Vac Tool Kit

Feature

Description

Product Description

There Is Nothing More Annoying Than Running Out Of Air Hose Or The Constant Repositioning Of A Wet/Dry Vac Canister. The Mr. Nozzle 12-Foot Extension Hose Eliminates That Hassle While Increasing Airflow For Optimum Performance. Better Yet, It’s Designed To Fit All Standard Wet/Dry Vacs. This Kit Comes Complete With A Molded Swivel Cuff For Effortless Movement And A High-Density, Polyurethane Crushproof Hose To Stand The Rigors Of Use. There’s Even A Nonclogging Claw Tool And A Rugged Crevice Tool For Those Hard-To-Reach Places. It’s The Ultimate Solution To Short, Brittle Hoses And Flimsy Attachments, Kit Includes 12′ Crush Proof Hose, Crevice Tool, Bench Tool And Handy Swivel Cuff , Hose Connection Measures 2-1/8″ I.D. X 2-1/4″ O.D. , Add Extra Length With The G5898 12′ Hose And Hose Coupling.

From the Manufacturer

There is nothing more annoying than running out of air hose or the constant repositioning of a wet/dry vac canister. The Mr. Nozzle 12-foot extension hose eliminates that hassle while increasing airflow for optimum performance. Better yet, it’s designed to fit all standard wet/dry vacs. This kit comes complete with a molded swivel cuff for effortless movement and a high-density, polyurethane crushproof hose to stand the rigors of use. There’s even a nonclogging claw tool and a rugged crevice tool for those hard-to-reach places. It’s the ultimate solution to short, brittle hoses and flimsy attachments. Your kit includes a 12-foot hose, claw nozzle, crevice tool, gray swivel cuff, and hose end.

7. CARSC Hand Held Vacuum Pump Tester Kit with Adapter and Case is Suitable for Automotive Vacuum Gauge and Brake Exhaust Kit (Blue)

CARSC Hand Held Vacuum Pump Tester Kit with Adapter and Case is Suitable for Automotive Vacuum Gauge and Brake Exhaust Kit (Blue)

Feature

Description

High Quality Car Auto Hand Held Vacuum Pistol Pump Brake Bleeder Adaptor Fluid Reservoir Tester Kit 2 in 1 Tool Kits

SPECIFICATIONS:
Condition: 100% brand new
Material: Alloy steel, plastics, rubber
Weight: 1.04kg
Dimension of case: 13.5*8.7*2 inch / 34.3*22*5 cm
Pressure range: 0-30inHg, 0-760mmHg

PACKAGE INCLUED:
_1 x vacuum pump/brake bleeder with vacuum gauge
_1 x reservoir jar & 2 x lids
_1 x “T” hose connector
_1 x straight hose connector
_1 x universal cup adapter
_1 x blow mold case
_1 x user manual
_2 x 24″ vacuum hoses
_2 x 3″ vacuum hoses
_2 x tapered hose adapters
_3 x brake bleeder valve adapters

NOTE:
Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals

8. WORKSHOP Wet Dry Vac Accessories 2-1/2-Inch WS25052A Shop Vacuum Car Detailing Kit for Wet Dry Shop Vacuum

WORKSHOP Wet Dry Vac Accessories 2-1/2-Inch WS25052A Shop Vacuum Car Detailing Kit for Wet Dry Shop Vacuum

Feature

Description

Size:2-1/2 Inch

This shop vacuum car detailing kit contains a few key automotive cleaning accessories that will turn your wet dry vacuum into a automotive cleaning machine. The flexible crevice tool, triangle soft bristle brush, and claw nozzle are shop vacuum attachments designed to work with a shop vacuum utilizing a 2-1/2-inch diameter vac hose to clean you car, truck, or van.

9. Cen-Tec Systems 94192 16 Ft. Hose for Home and Shop Vacuums with Multi-Brand Power Tool Adapter for Dust Collection, Silver

Cen-Tec Systems 94192 16 Ft. Hose for Home and Shop Vacuums with Multi-Brand Power Tool Adapter for Dust Collection, Silver

Feature

Description

Size:16 Ft. Hose

Cen-Tec Systems’ 94192 is engineered to connect a wide range of major power tool brands to your home shop vacuum for recovery of the debris and dust generated during the use of the power tool, keeping you and your shop clean while protecting you from airborne particulate that can harm your health. The 94192 is designed to be versatile with three unique and tool industry typical connections. The inner collar with durable acetal clip connects directly to most brands of dry wall sanders and other tools generating high volumes of dust or having large debris profiles. A bayonet fitting with 1″ soft TPE molded fitting is perfect for small power tool connections. The smooth 360 degree swivel rotation of the bayonet prevents the hose from kinking or resisting free movement of the power tool. Changing from the 1″ fitting to a 1. 50 soft TPE fitting popular on many chop saws and routers takes only a second using the quick clip system. An air relief is designed into the bayonet fitting to allow adjustment of the air stream at the tool as necessary to prevent tools sealing to the work surface. The 94192 offers a 1. 25″ X 16 foot highly flexible commercial grade vacuum hose with smooth interior to prevent clogs and maximize air flow to the vacuum. The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum. Cen-Tec’s 94192 hose is designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric. The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection. Compares favourably with VAC005.

10. WORKSHOP Wet Dry Vacuum Accessories WS25022A Extra Long Wet Dry Vacuum Hose, 2-1/2-Inch x 20-Feet Locking Wet Dry Vac Hose for Wet Dry Shop Vacuums

WORKSHOP Wet Dry Vacuum Accessories WS25022A Extra Long Wet Dry Vacuum Hose, 2-1/2-Inch x 20-Feet Locking Wet Dry Vac Hose for Wet Dry Shop Vacuums

Feature

Description

Looking to extend the reach of a shop vacuum with an extra long wet dry vacuum hose? At an incredible 20-foot this shop vacuum hose is ideal. The 2-1/2-inch diameter provides a larger opening for debris collection and maximum airflow. This wet dry vac hose Works with 2-1/2-inch shop vacuum accessories, and fits most shop vacuums with the standard 2-1/2-inch inlet port opening including most workshop wet/ dry vacs.

Conclusion

By our suggestions above, we hope that you can found Vacuum Tool Kit 2 Inches for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general