730 reviews analysed
1. Gates 27232 Power Brake Vacuum Hose (Standard)
Gates Gates Power Brake Hose 27232 11/32″ X 3′ PB (ONE PER PKG) Power Brake Hose (ONE PER PKG)
2. ACDelco 176-1551 GM Original Equipment Power Brake Booster Vacuum Hose
The ACDelco GM Original Equipment Power Brake Booster Line utilizes the vacuum produced by the vehicle’s engine to supply energy to the power brake booster, which assists the pedal input of the driver, and is a GM-recommended replacement for your vehicle’s original components. This power brake booster line has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
3. ACDelco 179-1266 GM Original Equipment Power Brake Booster Vacuum Check Valve Kit with Check Valve and Grommet
The ACDelco GM Original Equipment Power Brake Booster Check Valve functions as a one-way valve that ensures air does not enter the vacuum booster when the engine is turned off or if there is a leak in the vacuum hose, and is a GM-recommended replacement for your vehicle’s original components. This power brake booster check valve has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
4. Motive Products 101 Brake System Power Bleeder
- Heavy duty 2 quart pressure tank holds enough fluid to do complete flush & bleed.
- Built-in hand pump (no other pressure source is needed)
- Precision pressure gauge ensures safe and effective operation.
- Tested for compatibility with both standard and synthetic hydraulic fluids.
- All bleeders come with everything you need to bleed your hydraulic brake or clutch system and a full 1 year warranty.
Universal POWER BLEEDERTM Brake & Clutch System Bleeder Fits most imported and late model American cars Motive Products Universal POWER BLEEDERTM Bleeder works on most imported and late model American cars, including many GM, Ford, and Chrysler vehicles. Also fits most Honda, Mazda, Mitsubishi, Nissan, Toyota, Subaru and all other cars with a round hydraulic fluid reservoir smaller than 3.5 inches across. Comes with MP1101 adapter. POWER BLEEDERTM Features: * Heavy duty 2 quart pressure tank holds enough fluid to do complete flush & bleed. * Built-in hand pump (no other pressure source is needed) * Precision pressure gauge ensures safe and effective operation. * Tested for compatibility with both standard and synthetic hydraulic fluids. All bleeders come with everything you need to bleed your hydraulic brake or clutch system and a full 1 year warranty.
5. Bang4buck Universal Stainless Steel Braid Fuel System Line, 3′ X 3/8" Clamp-in Sleeving Kit Solid Fuel Hose, Cuttable, No Leaking (HSK1008-1526)
- Universal braided fuel line kit is 3/8 inch by 3 ft in length. 1Year 100% Quality Guarantee
- High pressure resistance, long lasting of use
- Max. Burst Pressure 400 PSI
- Max. Working Pressure 10 PSI
- Specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, powersteering fluids and nitrous oxide.
- Superior bonding eliminates hose fraying when cut
- Application:Universal Brake Lines, Clutch Lines, Fuel Systems, Turbo oil feed Hose, Coolant Systems, Oil Pressure Systems, Gauge lines & Power Steering
This universal fuel line will fit on any standard 3/8 inch hose barb in any fuel system. Sized at 3/8″ ID x 3ft, comes in handy just about anywhere fuel line is needed. It can be used anywhere on a car or truck fuel system. Universal in design and very flexible, this fuel line can be used anywhere! Works great as transfer line from your hard fuel line to fuel pump or from pump up to the fuel filter or carburetor. 3ft fuel line features a flexible rubber 3/8″ ID hose, covered with a steel braided jacket with bright anodized red & blue clamp covers on each end. This hose section of 36″ can be cut to any size needed & works on all gasoline applications, such as lawn mowers, tractors, go carts, snow blowers, motorcycles, cars & trucks.
Brackets Included: No
Hardware Included: No
Plug Wire Attachment Style: Clamp-in
Quantity: Sold as a kit
Wire Separator Finish: Chrome
Wire Separator Material: Plastic
Wires Per Separator: 2, 3, 4
Fits 7mm and 8mm spark plug wires; come with allen arench; keep the wires from heat
Hose Color: Natural
Hose Material: Braided steel
Hose Inside Diameter: 0.375 in
Hose Outside Diameter: 0.547 in
Hose Length: 3 feet
Note:Not suitable for fuel injection systems or E85 fuels
How to Cut:
For cutting your new steel braided hose to length you will need:
* cutting wheel/ hack saw/ or steel braided hose cutters
* duct tape or electrical tape (work best)
1. Measure your hose and find desired length.
2. Tape hose at measured length needed for application.
3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)
4. Remove the tape.
5. Slide one end of hose into end of fitting.
6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7. Make sure all connection are tight.
Package Included: 1 x Fuel hose
6. 12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike
- 5L oil liquid suction pump extractor,Small size, easy to carry and storage
- Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V
- Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm
- Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries
- Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe
How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out
Note: If you want to connect this pump to AC power, you will need a power converter.
7. GEARWRENCH Automatic Locking Ratcheting Hose Pinch Off Pliers – 145
- Pinch off Pliers eliminate the need to drain a cooling system during servicing
- Pliers squeeze hoses shut, and jaws swivel for parallel clamping
- Automatically locking ratchet
- “Maximum capacity of 1″ Outside hose diameter”
- Comfort grip handles to reduce user hand fatigue
- Not for use on wire-reinforced hose
- included components: (1) Automatic Locking Ratcheting Hose Pinch Off Pliers
- power source type: Manual
GEARWRENCH offers a variety of hose clamp and Pinch-Off pliers. The hose clamp pliers are available in straight, angled, heavy-duty, and corbin styles. They are used on flat band, corbin style, and flat ear style hose clamps. Hose Pinch-Off pliers are available to accept 4 hose diameters: up to 3/4″, up to 1″, up to 1-1/4″, and up to 2-1/2″. The hose clamp pliers are ideally used on a variety of hoses including radiator, water, air, heater, vacuum, and fuel lines. They’re a must have for every mechanic’s toolbox.
8. CTA Tools 7030 Master Cylinder Adapter – Honda
Applications: Honda Accord & CR-V. Adapter O. D. = 79. 5mm. Internal Male Insert O. D. = 56mm. Included in 11 Pc. Master Cylinder Adapter Kit – CTA #7300. California Prop 65 – Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
9. Motive Products 1105 Master Cylinder Adapter
Rectangular universal style adapter for Power Bleeder fits vehicles with oblong or rectangular master cylinder reservoir up to 4.25 x 6.75 (most 1967 to mid 80’s American cars). Includes clamping hardware to connect to master cylinder
10. Motive Products 105 Brake System Power Bleeder
Brake Bleeder – Power Bleeder – Pump / Hoses / Catch Can / Fittings – Early American Rectangular Style – Kit
By our suggestions above, we hope that you can found Power Brake Vacuum Hose Clamps for you.Please don’t forget to share your experience by comment in this post. Thank you!