Top 9 Pool Vacuum Syphon

The Robelle jet vacuum is a Venturi vacuum with 5 foot pole. No filter system required. Quick-disconnect fitting for use with garden hose. Includes reusable leaf bag. For Above-Ground pools, spas, & other small water features.

Easy to use: Simply attach the vacuum together and connect the vac to your garden hose. The vacuum works with the force of the water pressure entering into the vacuum creating a venturi action in which then draws debris and leaves right into the mesh net.This vacuum cleaner is great for cleaning a Spa, Pond, Fountain, Above-ground and Spasher pools. *****Watch this video link for installation***** https://www.youtube.com/watch?v=h-kDzRiNZaM

The Intex Rechargeable Handheld Vacuum is a must-have for any above ground pool owner. The strong, built-in Ni-MH rechargeable battery produces a strong suction for an efficient clean. The vacuum has no cables or hoses to worry about, just charge the battery, attach the telescoping aluminum shaft and you’re all set! Featuring two interchageable brush heads and a shaft adapter, the Handheld vacuum is extremely versatile. The vacuum is effective in pools with an 18′ diameter or smaller and a USB cable is included for convenient charging.

The Wanda Vac is the ideal cleaning tool for small pools, spas or spot cleaning in larger pools. It is easy to use, there is no set-up, just grab it and start vacuuming! The battery-operated pump creates a strong suction which picks up stones, leaves, sand, dirt and other debris. There are no messy hoses or electrical cords. An aluminum, telescoping handle is included which can be adjusted to different lengths for multiple cleaning applications. The long lasting, stainless steel filter is easy to clean and the clear sleeve shows “at a glance” if the filter is full. Requires 8 AA batteries (not included).

This easy to assemble underwater cleaner is simply powered by the water pressure from a garden hose. The water from the hose enters the vacuum and creates a suction effect, which pulls dirt and debris into the fine nylon mesh collection bag. No pump or filter is necessary. Saves water, no need to empty the pool to clean.

Product Description

The WAPC250 is an automatic on/off water removal pool cover pump. Max. Flow rate is 3000 gallons per hour using 1-1/4″ drain hose. Includes: check-valve with 3/4″ garden hose adapter to reduce repetitive cycling, 25 foot power cord (always plug into a gfci outlet), 25 foot “pull to shore” rope included to help position the pump on the pool cover. When temperatures drop below freezing remove pump from service and store indoors to protect pump from damage due to ice. The pump has a unique protection circuit to protect the motor from a locked impeller condition possibly caused by debris buildup or from a frozen impeller situation caused by ice formation. When the pump is activated and a locked impeller condition is detected the unit will automatically shutdown to protect the motor from overheating. The pump will continue this on or off cycle for a period of time to attempt to free the impeller until eventually the unit will remain off for a period of 12 hours checking twice a day for a freed impeller. Once the pump is able to operate correctly the pump will resume normal operation. To reset this delay without waiting 12 hours momentarily unplug the pump

From the Manufacturer

1/4 HP Auto On/Off Pool Cover Water Removal Pump.

The easy way to drain water that has collected on a winter cover. No power required! The pool cover drainer comes with 15′ of hose and syphon, to draw out the water on the pool cover for easy pool maintaining.