637 reviews analysed
1. HEATIT HISD 9-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality warranty. If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
Why can HISD pipe heating cable give you a safe, healthy energy saving and durable water pipe?
The plug of HISD owned the indication light to show you whether there is electricity or not. With the build in thermostat, you can save more energy.
HISD pipe heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble pipe heating cable make installation easy for do-it-yourselfers.
HISD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HISD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HISD more reliable.
The HISD is pre-assemble and easy to install, protect the pipe diameters up to 1.5″ from freezing. You can choose different lengths based on the chart in the instruction.
Never allow heating cable to touch, cross or overlap itself at any points. No crossing. No spiraling. Never install heating cable on plastic pipe unless pipe is filled with water all the times.
Do not install the same cable on more than one pipe.
While it is coiled, never plug in the heating cable.
Never alter this heating cable in any way.
The thermostat and the entire heating cable has to be in contact with the pipe.
Combustible material must not be within 1/2 in. of completed installation.
Never use metal binding to secure heating cable to pipe.
2. EasyHeat 2102 Freeze Free Heating Cable – 100′
- Self-regulating pipe heating system
- Provides flexible protection against pipe freeze-ups in even the most challenging applications
- Reduces power consumption when the pipe does not require freeze protection
- Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
- Length: 100′ and rugged metal braided jacket provides an electrical ground as well as protection against damage
EasyHeat Freeze Free self-regulating pipe heating cables provide flexible protection against pipe freeze-ups in the most challenging applications. The cut-to-length technology is ideal for installations that require protection of numerous pipes of varied lengths. The self-regulating effect of the cable reduces power consumption when the pipe does not require freeze protection. They are ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures; water supply lines underneath manufactured homes; and cottages, barns and outbuildings that are not regularly used.
3. HEATIT JHSF 3-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
4. iPower GLDUCT4X8C 4 inch 8 feet Non-insulated Ducting Aluminum Foil Vent with 2 Clamps
iPower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive.
iPower Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.
Benefits of iPower Ducting:
- This 4-inch ducting fits any standard 4-inch inline fan.
- 3-layer thickness: Aluminum Foil + PET + Aluminum Foil.
- Helically shaped and internally crimped galvanized steel strip.
- Interlocking steel strips to form an air tight and leak proof system.
- Each ducting unit includes a pair of metal clamps made from stainless steel.
- This air duct is easy to cut using a pair of metal snips or a standard wire cutter.
- This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.
- This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.
- Typical applications for ventilation ducting include: dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications.
- 12-month manufacturer warranty.
5. DEPSTECH Wireless Endoscope, WiFi Borescope Inspection 2.0 Megapixels HD Snake Camera for Android and iOS Smartphone, iPhone, Samsung, Tablet -Black(11.5FT)
- 【Registered Brand】: Depstech【Authorized Store】: Depstech【Product Warranty &Design Patent】Every product from Depstech store will enjoy our true and safe warranty. For this WiFi version endoscope, we have applied the certificate of Design Patent.
- 【The Newest Type Endoscope】: Unlike other endoscope cameras on the marketplace, this wireless wifi endoscope camera not only work with Android smartphone(Above Android 2.3) excluding Google Pixel 2, but also iPhone IOS system(Above IOS 6.0). This is perfect for iPhone user who want do inspection work. Without using extra adapter or cable, it can be easily connected with your smartphone via WIFI. The only thing you need to do is to download and install the compatible APP “DEPSTECH”on your device.
- 【Unique Blue LED technology】: 6 adjustable blue LED light on camera tip, it greatly helps to improve image brightness and clarity even in dark or low-light condition. Moreover, the art of 1200P camera offers you a wonderful experience of recording a clear close range HD video in AVI format and snapshot image in JPG format with four adjustable resolutions 320×240, 640×480, 1280 x 720,1600×1200.
- 【Featuring 11.5FT cable, waterproof and 8.5mm diameter camera】: this endoscope can suit for various types of environment, for example, low-light or dark area, damp or wet area etc. Furthermore, armed with bendable semi-rigid cable which can be hold it’s shape to access a wide variety of confined place.
- 【Premium Camera Chip】:Adopting the second generation chip at 30fps, which is best for acquiring the smoothest video and image, and this is a great advantage over the other products at 10fps on the marketplace.Pls note that our products are certified and pls place an order on DEPSTECH endoscope.
6. Dual Wall Heat Shrink KIT – 85 Pieces – 3:1 Shrink Ratio – Size Range: 3/32" to 1/2" – Black
7. SummitLink 218 Pcs Black Assorted Heat Shrink Tube 8 Sizes Tubing Wrap Sleeve Set Combo
Sizes: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm
Supplied internal diameter: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm
Fully shrunk internal diameter: 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm
Shrinkage Ratio: 2:1 (will maximum shrink to 1 / 2 of its supplied diameter)
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C maximum
Operating Temperature: -55°C to + 125°C
Tensile strength: 10.4 Mpa
Dielectric strength: 15 kV / mm
Flammability: Flame Retardant
Supplied format ( round or flat ): Product is supplied flat
Cutting method: Scissors or sharp knife
Manufacture specification: ISO9001
Approvals: UL Approved
( Quantity x Supplied internal diameter x Single length )
80pcs x 1.0 x 80mm
46pcs x 2.0 x 80mm
30pcs x 3.0 x 80mm
20pcs x 4.0 x 80mm
12pcs x 6.0 x 80mm
10pcs x 8.0 x 80mm
10pcs x 10.0 x 80mm
10pcs x 14.0 x 80mm
8. Pirit PWL-03-25 25-Feet Heated Hose
- No more frozen hoses
- Provides constant source of water in freezing temperatures
- Thermostatically controlled
- Turns on when temperatures are below 45 degrees
- Turns off when temperatures are above 50 degrees
- Made from drink-safe PVC
- Keeps water from freezing down to minus 42-Degrees Fahrenheit
- New tougher thermostat
- 5/8 in. Diameter
Cold weather water hose ideal for normal farm and garden use, and light commercial applications. Ideal for tasks requiring running water in below freezing temperatures. Thermostatically controlled to activate automatically when temperatures are below 45 deg (degrees) F (Fahrenheit) and turn off when temperatures are above 50 deg F. Tested down to -42 deg F. Features a grounded power supply, grounded nickel plated brass female & male couplings, protective bend restrictors at both ends, abrasion resistant cover, and knit reinforcing. Heater wires are extruded directly into the hose walls for uniform heating and unrestricted water flow. Made with FDA (Food and Drug Administration) approved materials. Drinking water safe. UL (Underwriter’s Laboratories) listed. MET approved. 1-year limited warranty. The Product is manufactured in China.
From the Manufacturer
The 25-Feet Series 2 PIRIT Heated Hose is made from drink-safe materials and thermostatically controlled to automatically turn on when needed and prevent water from freezing in the hose down to minus 42-Degree Fahrenheit. With a new, tougher thermostat hardwired to the outside of the hose you are guaranteed more consistent and customizable results depending on your need. The hose comes with a 1-year limited warranty against defect.
9. Purple-fox 3:1 Heat Shrink Tubing Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY (Dia 3/8" (9.5mm))
- Safety and Environmental Protection: Purple-fox heat-shrinkable tubes are UL and CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances protecting you and your family from toxins
- Versatile and DIY Helper: High-quality heat shrink tubing, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.
- Great Advantages : Our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
- Easy and fast: It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one.
- Widely Applications: Heat-shrinkable tubes are mainly used for wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment. Fitness equipment parts and steel structure surface protection and so on.
Adhesive Lined Heat Shrink Tubing Sleeving
Main color: black
Round diameter: 12.7mm (1/2″)
Shrink temperature: 80C;
Fit for: appliance/Auto wire harness
Each Length: 1.5M/ 5Ft;
temperature range: -55C to +125C
Beginning shrinking temperature:80C,
Completely shrinking temperature: 120C
package content: 1 x heat shrink tubing(1.5m Length/5Ft )
Tough flame-retardant polyolefin tubing lined withal flame-retardant adhesive provides the optimum solution for applications where full flame retardant is preferred.
Dual wall heat shrink tubing is suitable for shrinking and sealing connectors, wires, and cords etc., which will be exposed to harsh environments.
How to use it?
1. First choose the right size tubes, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter.
2. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly.
3. Don’t touch the tube until it becomes cool.
By our suggestions above, we hope that you can found Electric Heating Cable Flexible Water Pipe for you.Please don’t forget to share your experience by comment in this post. Thank you!