526 reviews analysed
1. Power Brake Booster Vacuum Pump Assembly 20804130 31317530
2. Dracarys 28146 Electric Vacuum Pump Kit For Brake Booster Vacuum Pump Electric Vacuum Pump For Brakes
Feature
- ➤12V Electric Vacuum Pump,performance brakes 28146 electric vacuum pump kit. Complete installation accessories.There are detailed installation instructions in the package. If you miss the accessories or instructions, please contact us. We also provide quality assurance.
- ➤Booster Vacuum Pump,help the vacuum pump to amplify the brake effect by vacuum.At -0.004MPA to -0.006MPA, the switch is turned on and the vacuum pump is running.The pump is designed to kick on when the vacuum falls below -0.04 MPA and kicks off around -0.06 MPA.So the pump is not always running,it will do an intermittent job according to the degree of vacuum.
- ➤Uses a highly effiecient electric pump, relay switch and sitributor with vacuum switch which should be mounted close together for effectiveness.
- ➤Products include vacuum pumps and other accessories(Pressure Switch,Power Relay,Outlet Muffler,Fuse Holder,Ring Connect,Bolts,Bullet Connects,Pump Mounts,Quick Connects 1/4,Washers/Nuts,Tubing,Brown Wire).
- ➤New outlet muffler included at present,decrease decibel.High quality,easy installation.（Package with installation instructions).
Description
Dracarys New 12V Electric Brake Vacuum Pump Kit for Booster 28146
Our products are in high quality and export to many countries including USA Europe countries and other places.We ship from the USA,so you will receive as soon as possible after you paid.
Ⅰ.PROMOTIONS➜
Now each set of $199 dollars, the value is super cost-effective, the quality is guaranteed!
Ⅱ.PRODUCTS INCLUDE➜
Vacuum Pump one,Pressure Switch one,Power Relay one,Fuse Holder one,Ring Connect one,Bolts one,Bullet Connects one,Pump Mounts one,Quick Connects 1/4 four,Washers/Nuts 10 each,Tubing one(72in),Brown Wire 1 volume(108in).
Ⅲ.HOW TO INSTALL?➜
We have prepared the installation instructions for you, which explains how to install the vacuum pump and some special precautions, problems that may arise, etc.
Ⅳ.FACTORY INSPECTION➜
The vacuum pump must be inspected and tested before leaving the factory.
✔Motor idle current test
✔visual inspection after assembly
✔The finished product air current is within the qualified range
✔Load test pressure(Inspiratory ,Sonar, Leakage Test)
Ⅴ.PRODUCT WARRANTY➜
This Product carries a limited (1) year warranty against manufacture defects. Failure to properly install or use the product as intended, or modifying the product and/or components of the kit, will void the manufacturer’s warranty.
Ⅵ.CONTACT US➜
If you have any problems please contact us.Thank you for your purchase!
3. HTOMT 2 in 1 Brake Bleeder Kit Hand held Vacuum Pump Test Set for Automotive with Sponge Protected Case,Adapters,One-Man Brake and Clutch Bleeding System
Feature
- Easy Usage: Hand vacuum pump is easy to bleed your car brakes.
- Convenient Carrying: Portable kit which includes different adapters designed for all vehicles is suitable for both home and business applications.
- Widely Use: 4 tubes of different length to cover different needs.
- Vacuum Gauge: Equipped with vacuum gauge, convenient readout of pressure, Pressure range: 0-30inHg, 0-760mmHg
- Carry Case : Made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage
4. Motive Products, European Power Brake Bleeder, 0100, Hand Pump Pressure Tank with Adapter
Feature
- IMPORT CARS – Made to fit all cars with 45mm threaded hydraulic fluid reservoir caps. Also fits some GM clutches
- HEAVY-DUTY – Corrosion-proof materials and design ensures power bleeder to be maintenance free for years of service
- PORTABLE – Built-in hand pump allows use anywhere from the home, shop, or track. The easy to pressurize system allows for one-person operation
- FLUSH AND BLEED – The 2 quart pressure tank holds enough fluid for a complete system flush. Precision pressure gauge ensures safe and effective operation
- KIT INCLUDES – Everything needed for a hydraulic brake fluid job – pressure tank, hand pump, gauge, 1100 adapter, gasket and hose
Description
Works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche,
Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps (This kit
includes adapter 1100) Also fits some GM clutches. All bleeders come with a full 1 year warranty.
Why change Brake fluid? It is hygroscopic and absorbs water from the atmosphere, lowering its boiling point
and causing corrosion. Particulate contamination–microscopic particles of rust and rubber–hastens
wear of moving components. This is why manufacturers and mechanics recommend fully flushing hydraulic fluid
annually. In addition, whenever the hydraulic system has been opened (e.g. when a hydraulic system component is
changed), the system must be bled of air.
5. Capri Tools Vacuum Brake Bleeder
6. Motive Products 0107 Power Pressure Brake and Clutch Bleeder For Ford and Asian Cars and Trucks
Feature
- Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines
- Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge
- Heavy duty 2 quart pressure tank holds enough fluid to do complete flush and bleed
- Built-in hand pump (no other pressure source is needed)
- Precision pressure gauge ensures safe and effective operation. Push cap down until it seats. Twist to seal
- Refer to the product description section for fitment information
7. CARSC Hand Held Vacuum Pump Tester Kit with Adapter and Case is Suitable for Automotive Vacuum Gauge and Brake Exhaust Kit (Blue)
Feature
- Multifunctional: The Vacuum Pump/Brake Bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations. By using some of the included accessory caps and fittings it can also be used as a brake bleeder.
- Tester: Cushioned pistol grip handle with vacuum gauge, simple operation, gauge range 0-30 inches Hg, 0-760 mm Hg.
- Complete kit includes accessories for both brake bleeding and automotive diagnosis. Vacuum pump set can test and diagnose a wide varity of parts and common systems on any vehicle.
- Easy to use: Easily bleed brakes by yourself. Coming with a carrying bag, made by high quality material, and easy to carry.
- 3 month limited warranty.
Description
High Quality Car Auto Hand Held Vacuum Pistol Pump Brake Bleeder Adaptor Fluid Reservoir Tester Kit 2 in 1 Tool KitsSPECIFICATIONS: Condition: 100% brand new Material: Alloy steel, plastics, rubberWeight: 1.04kgDimension of case: 13.5*8.7*2 inch / 34.3*22*5 cmPressure range: 0-30inHg, 0-760mmHgPACKAGE INCLUED:_1 x vacuum pump/brake bleeder with vacuum gauge_1 x reservoir jar & 2 x lids_1 x “T” hose connector_1 x straight hose connector_1 x universal cup adapter_1 x blow mold case_1 x user manual_2 x 24″ vacuum hoses_2 x 3″ vacuum hoses2 x tapered hose adapters_3 x brake bleeder valve adaptersNOTE:Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals
Conclusion
By our suggestions above, we hope that you can found Brake Vacuum Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
