Top 10 Automotive Vacuum Leak Locator

0
653 reviews analysed

1. AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter Diagnostics for Automotive EVAP Leak Locator Tester

AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter Diagnostics for Automotive EVAP Leak Locator Tester

Feature

2. AUTOOL Automotive Smoke Leak Detector Evap Car Pipe Leakage Tester Fuel Leak Locator Universal for Motorcycle/Car/Truck

AUTOOL Automotive Smoke Leak Detector Evap Car Pipe Leakage Tester Fuel Leak Locator Universal for Motorcycle/Car/Truck

Feature

3. Rhinotuning Vac-Leak Hunter Automotive Smoke Machine Leak Diagnostic Detector Tester Built-in Pump

Rhinotuning Vac-Leak Hunter Automotive Smoke Machine Leak Diagnostic Detector Tester Built-in Pump

Feature

Description

How does it work?

1、Fill with 50-100ml of smoke oil and cover with rubber plug.

2、Connect the wire and the smoke pipe to the corresponding port on the machine.

3、Connect the power clamp to the car battery. Red is connected to the positive, Black is connected to the negative.

4、Turn on the power switch, and the machine starts to work.

5、Check the leak position. Please use head lamp if necessary. After leak detection, turn off the power and take off the pipe and power wire.

What’s Included?

●Smoke machin

●Detachable power cord

●Pipe connector

●Funnel

●Silicone tube

●Instruction Manual

What You’ll Need

●12.5V Power (uses vehicle’s 12V battery)

●Professional smoke oil or baby oil

Tips

Please make sure your Vehicle’s battery is in a healthy condition, the machine is suggested supply with DC voltage at 12.5+_V, lower voltage will decrease the amount of smoke and air pressure.

4. AUTOOL Automotive Leak Detector Tool Cars Leak Locator Tester Car Pipe Leakage Tester Support Evap for All Vehicles

AUTOOL Automotive Leak Detector Tool Cars Leak Locator Tester Car Pipe Leakage Tester Support Evap for All Vehicles

Feature

Description

Size:Fuel Leak Locator Tester

Working principle:
create smoke through the equipment and sent smoke to sealed car pipeline system(Such as air intake systems, exhaust systems, fuel systems, air conditioning systems, etc.) Where there is smoke in the pipeline, there is a leak
With smoke detectors to check the car pipeline, will not have impact on the car system

How to Use:
1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.
8.Notes:
* Please do leak detection away from smoke-sensitive parts.
* Do not run the detector over 8 minutes. It needs interval rest.
* The detector has protector. If it exceeds working limit, it will power off
automatically. In this condition, please operate it later.
* The round parts of this detector is with temperature, be careful to avoid scalding injury.

Package List:
1.Main Unit
2.Hook
3.Rubber stopples
4.Taper stopple
5.Taper pipe
6.30ml oil bottle
7. User manual

5. AUTOOL 12V Automotive Fuel Leak Detectors SDT-202 Cars Leak Locator Tester Car Fuel Leak Detectors SDT202 Car PIPE Leakage Tester Support EVAP For All Vehicles

AUTOOL 12V Automotive Fuel Leak Detectors SDT-202 Cars Leak Locator Tester Car Fuel Leak Detectors SDT202 Car PIPE Leakage Tester Support EVAP For All Vehicles

Feature

Description

Cautions:

1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range.
2.New oil can be filled with only when the smoke is light,and it can’t be filled over 15ml every time.
3.Before filling new oil, please pour out the remaining oil in the detector.
4.Please replace the detector oil regularly.

How to Use:

1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.
* Do not run the detector over 8 minutes. It needs interval rest.
* The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.
* The round parts of this detector is with temperature, be careful to avoid scalding injury.

Package List:

1.Main Unit
2.Hook
3.Rubber stopples
4.Taper stopple
5.Taper pipe
6.30ml oil bottle
7. User manual

6. MRCARTOOL T110 2 MODE Automotive Fuel Leak Detectors Car Pipe Leakage Tester Car Leak Locator Automotive Diagnostic Leak Detector Support EVAP For Motorcycle/Cars/SUVs/Trucks/Boats

MRCARTOOL T110 2 MODE Automotive Fuel Leak Detectors Car Pipe Leakage Tester Car Leak Locator Automotive Diagnostic Leak Detector Support EVAP For Motorcycle/Cars/SUVs/Trucks/Boats

Feature

7. AUTOOL SDT206 Automotive Fuel leakage Diagnostic Tester 2 MODES Car Conduit PIPE System Leakage Tester Car Fuel Leak Detector For 12V Vehicle Boat With Adjustable FlowMeter EVAP Leak Testers Detectors

AUTOOL SDT206 Automotive Fuel leakage Diagnostic Tester 2 MODES Car Conduit PIPE System Leakage Tester Car Fuel Leak Detector For 12V Vehicle Boat With Adjustable FlowMeter EVAP Leak Testers Detectors

Feature

8. EVAP Smoke Machine, AUTOOL SDT-106 Automotive EVAP Leaks Testing Machine, Fuel Leak Detectors 12V Car Leak Locator Tester for All Vehicle

EVAP Smoke Machine, AUTOOL SDT-106 Automotive EVAP Leaks Testing Machine, Fuel Leak Detectors 12V Car Leak Locator Tester for All Vehicle

Feature

Description

HOW TO USE:
1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle.Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.

Package:
1* Main Unit
1* Hook
1* Rubber stopples
1* Taper stopple
1* Taper pipe
1* 30ml oil bottle
1* User manual

MAINTENANCE
With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.
1.Before filling new oil, please pour out the remaining oil in the detector.
2.When the smoke output has water drops, please replace with new oil.
3.Liquid paraffin and baby oil are OK.
4.Please fill new oil with equipped oil bottl

NOTES
Please do leak detection away from smoke-sensitive parts.
It can suitable for EVAP.
Do not run the detector over 5 minutes. It needs interval rest.
The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.

9. AUTOOL SDT-106 Automotive Diagnostic Fuel Leak Detectors EVAP Pipe Leakage Tester Locator For 12V Vehicles

AUTOOL SDT-106 Automotive Diagnostic Fuel Leak Detectors EVAP Pipe Leakage Tester Locator For 12V Vehicles

Feature

Description

Cautions: 1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range. 2.New oil can be filled with only when the smoke is light, and it can’t be filled over 15ml every time. 3.Before filling new oil, please pour out the remaining oil in the detector. 4.Please replace the detector oil regularly. Operation 1.Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. 3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5.Turn on the power switch, and detector starts to work. 6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7.After leak detection, please connect well the wires and pipe. * Do not run the detector over 8 minutes. It needs interval rest. * The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. * The round parts of this detector is with temperature, be careful to avoid scalding injury. Maintenance With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. 1.Before filling new oil, please pour out the remaining oil in the detector. 2.When the smoke output has water drops, please replace with new oil. 3.Liquid paraffin and baby oil are OK. 4.Please fill new oil with equipped oil bottle

10. AUTOOL SDT-208 Automotive Fuel leakage Tester 4 IN 1 Car Conduit PIPE System Leak Detection Tools, Car Fuel Leak Detector For 12V/24V Vehicles Boats With Adjustable FlowMeter EVAP Leak Detector

AUTOOL SDT-208 Automotive Fuel leakage Tester 4 IN 1 Car Conduit PIPE System Leak Detection Tools, Car Fuel Leak Detector For 12V/24V Vehicles Boats With Adjustable FlowMeter EVAP Leak Detector

Feature

Description

Operation

1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.Adjust the flow gauge. Control the input smoke value and pressure to make sure the pipe system can afford the pressure.
7.In about 3 minutes, the pipe will be filled with smoke.
8.Observe the floating ball in flow gauge. If the floating ball stays still in the bottom, the pipe is sealed with. If the floating ball is arising or bouncing, the pipe is leaking.
9.Position the leak points by floating ball. If the bounce arises highly, the leakage is serious.
10.Check the leak points. Please use head lamp if necessary.
11.After leak detection, please connect well the wires and pipe.
Do not run the detector over 5 minutes. It needs interval rest.
The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.

Maintenance

With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.
1.Before filling new oil, please pour out the remaining oil in the detector.
2.When the smoke output has water drops, please replace with new oil.
3.Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil

Conclusion

By our suggestions above, we hope that you can found Automotive Vacuum Leak Locator for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general